HORIZONTAL BALERS

HORIZONTAL BALERS
Choosing the right baler for your application is an important decision
that can have a long-term financial impact on your operation. Whether
your baler is the prime producer or part of a much larger production,
choosing the improper baler you could jeopardize your plant efficiency,
which can lead to excessive operating costs due to poor productivity
and high consumable costs. There are a number of types of balers on the
market such as Extrusion Horizontal Balers, Closed Door Horizontal
Balers, Two Ram Balers and Vertical Downstroke Balers; each type is
available from several manufacturers.
  • horizontal balers

  • Machinex

  • shredder

  • baler
    baler_parts
    nms_horizontal_balers

    horizontal_balers
    conveyor_systems

    machine-xrt.com
    conveyor
    • If you only make a few bales of cardboard per day, a lower cost Vertical
    Downstroke or a Closed Door Horizontal Baler may be all that you need. If you generate several tonnes of baleable material per hour you will require a more expensive Horizontal Auto-Tie baler or a Two Ram Baler, depending on the type of material to be baled. Of course, it's also important to project realistic business growth over the next five years or so and factor the increased volume into your capacity requirement.

    There are specific hydraulic principles that cannot be altered such as
    the formula used to determine the speed of a hydraulic cylinder that
    moves the ram in horizontal balers. In order to move a cylinder at a
    given speed at a specific amount of pressure, a certain flow of oil is
    required by the pump, which in turn requires a certain horsepower to
    maintain proper operating pressure. Maximizing oil flow is commonly
    accomplished by using multiple pumps (high and low volume) and
    regenerative hydraulic circuits. In some cases the weight of the
    horizontal balers ram alone will switch off a high volume pump,
    decreasing the speed of the horizontal baler before the ram has even
    met the resistance of the material being baled. The denser the
    material, the slower the ram will travel which can lead to lower
    productivity.         		MANUAL TIE HORIZONTAL BALERS: THE CLOSED DOOR SERIES
    • Production Volume: low
    • Feed Opening: up to 42" x 60"
    • Cycle Times: 14 to 24 sec.
    • PSI: up to 91
    • Bale Size: 30"x36"x60"
    Bale Size: 0and 42"x42"x60"
    • Bale Weight: up to 1,600 lbs.
    • Production Capacity: 2-3 bales/hr

    homefurnitureplus.com / recycling equipment supplier / HORIZONTAL BALERS